Welcome to ZJART Tiffany Light Shop

Installation of Tiffany table lamp

The first one: bracket-free table lamp

Check if the accessories are complete
Grasp the lamp head with your left hand and rotate the spiral pressure ring counterclockwise with your right hand to disengage it from the head.
Put the lampshade on top of the bracket and tighten it with the lamp head.
If the lampshade is tilted, please loosen the lamp head to adjust the lampshade and then tighten it again.
Turn on the power and press the switch to use normally.

The second type: table lamp with bracket
Check if the accessories are complete
Lightly press the bracket with your hand, and install it into the recess of the bull's-eye on both sides of the lamp head as shown.
Put the lampshade on top of the bracket and tighten it with the lamp head.
If the lampshade has a tilt, please loosen the lamp head to adjust the lampshade and then tighten it.
Turn on the power and press the switch to use normally.

Leave a comment

Please note, comments must be approved before they are published